COMPUTATIONAL FLUID DYNAMICS
SINGLE WING ANALYSIS
£500.- Single Element / £700.- Dual Element (no VAT)
What type of people use this service?
- Anyone with a Single or Dual Element wing requiring downforce and drag values for optimisation of set-up
- Teams assessing and comparing various wing profiles to find which is the most appropriate
- Anyone wanting to optimise existing wing supports, end plate positions and gurney flap sizes
What do you get?
- Onsite visit to measure up wing profiles, end plates and supports
- Measurement and creation of wing profile CAD for CFD analysis
- Provision of completed CAD wing assembly
- PDF printable report including CFD screenshots, flow analysis, Downforce v Drag values over full range of wing angles
- 1yr phone support covering what is involved in the report
What is covered in the report?
- CFD derived flow visualisation
- CFD derived Downforce and Drag values in graph form
- Screenshots showing optimised positions of existing supports, end plates and gurney flaps
- Optimised flap angles for Dual Element wings
How long does it take?
- A SINGLE WING ANALYSIS report is usually generated in less than two working weeks
MULTIPLE WING ANALYSIS
£750.- Single Element / £1050.- Dual Element (no VAT)
What type of people use this service?
- Anyone with Front and Rear, Single or Dual Element, wings requiring downforce and drag values for optimisation of set-up
- Teams assessing and comparing various wing profiles to find which is the most appropriate
- Anyone wanting to optimise existing wing supports, end plate positions and gurney flap sizes
- Anyone wanting to check simplified flow interference between front wing wake and rear wing performance
What do you get?
- Onsite visit to measure up front wing profiles, end plates and supports
- Onsite visit to measure up rear wing profiles, end plates and supports
- Measurement and creation of wing profile CAD for CFD analysis
- Provision of completed CAD front wing assembly
- Provision of completed CAD rear wing assembly
- PDF printable report including CFD screenshots, flow analysis, Downforce v Drag values over full range of wing angles
- 1yr phone support covering what is involved in the report
What is covered in the report?
- CFD derived flow visualisation
- CFD derived front wing downforce and drag values in graph form
- CFD derived rear wing downforce and drag values in graph form
- CFD derived downforce and drag values in graph form based on predicted wing integration
- Screenshots showing optimised positions of existing supports, end plates and gurney flaps
- Optimised flap angles for Dual Element wings
How long does it take?
- A MLTIPLE WING ANALYSIS report is usually generated in less than three working weeks
COMPONENT OR SYSTEM ANALYSIS
From £500.- (no VAT)
What type of people use this service?
- Anyone that has a single component or sub-assembly flow issue that requires accurate analysis
- Designers wanting to focus on cooling issues, wing mounts, nose cone re-designs, wheel arch analysis
- Engine builders wanting to analyse cooling flow through an assembly
What do you get?
- Onsite visit to measure up components if required
- Measurement and creation of CAD for CFD analysis
- Provision of completed CAD assembly
- PDF printable report including CFD screenshots, flow analysis, values over full operating range
- 1yr phone support covering what is involved in the report
What is covered in the report?
- CFD derived flow visualisation
- CFD derived values in graph form
- Screenshots showing optimised positions of components
How long does it take?
- A COMPONENT OR SYSTEM ANALYSIS report can be generated in less than one working week
BASIC BODYWORK ANALYSIS
From £2500.- (no
VAT)
What type of people use this service?
- Designers wanting to optimise their bodywork within the championship regulations
- Owner Drivers looking at the addition of "Bolt-On" performance upgrades to create an effective aero package
- Track Day drivers with saloon cars wanting improved aero packages including splitters, side skirts, wings etc
- Single Seater drivers looking at improving their aerodynamic packages and need effects of rotating wheels considered
- Anyone considering a substantial aero package that will require expensive and time consuming manufacture
What do you get?
- Onsite visit to measure up vehicle body, splitters, wings, diffusers, side pods etc
- Creation of suitable CAD to allow CFD analysis
- Provision of completed CAD assembly and sub-assembly
- PDF printable report including CFD screenshots, flow analysis, Downforce v Drag values over full range of wing angles
- 1yr phone support covering what is involved in the report
- Further visit to Track/Workshop to advise on build and set-up
What is covered in the report?
- CFD derived flow visualisation
- CFD derived front wing downforce and drag values in graph form (if applicable)
- CFD derived rear wing downforce and drag values in graph form
- CFD derived downforce and drag values in graph form based on predicted wing and bodywork integration
- Screenshots showing optimised positions of wings, splitters, vents etc
- Optimised flap angles for Dual Element wings
- Summary of cooling flows
- Test Schedule
- Aerodynamic Balance Guide
How long does it take?
- A BASIC BODYWORK ANALYSIS report is usually generated in less than four working weeks
ADVANCED BODYWORK ANALYSIS
From £3500.- (no
VAT)
What type of people use this service?
- Designers wanting to optimise their bodywork within the championship regulations
- Owner Drivers looking at the addition of "Bolt-On" performance upgrades to create an effective aero package
- Track Day drivers with saloon cars wanting improved aero packages including splitters, side skirts, wings etc
- Single Seater drivers looking at improving their aerodynamic packages and need effects of rotating wheels considered
- Anyone considering a substantial aero package that will require expensive and time consuming manufacture
What do you get?
- Onsite visit to 3D Scan and measure up vehicle body, splitters, wings, diffusers, side pods etc
- Creation of accurate CAD model as either a single solid body or individual assembly components to allow CFD analysis
- Accurate CAD assembly that can be used to build off in future designs or for component manufacture
- PDF printable report including CFD screenshots, flow analysis, Downforce v Drag values over full range of wing angles
- 1yr phone support covering what is involved in the report
- Further visit to Track/Workshop to advise on build and set-up
- 1 Day Track Support OR discounted Wind Tunnel Support
What is covered in the report?
- Improved accuracy CFD derived flow visualisation
- Improved accuracy CFD derived front wing downforce and drag values in graph form (if applicable)
- Improved accuracy CFD derived rear wing downforce and drag values in graph form
- Improved accuracy CFD derived downforce and drag values in graph form based on predicted wing and bodywork integration
- Screenshots showing optimised positions of wings, splitters, vents etc
- Optimised flap angles for Dual Element wings
- Summary of cooling flows
- Test Schedule
- Aerodynamic Balance Guide
How long does it take?
- An ADVANCED BODYWORK ANALYSIS report is usually generated in less than four working weeks